20
4. Use
When the incoming water temperature is less than or equal to the required temperature (setpoint tempera-
ture - 1°C), the heat pump will switch to heating mode. The compressor will stop when the temperature of
the incoming water is greater than or equal to the required temperature (setpoint tempe 1°C).
WARNING:
When the cooling mode switches to heating mode or vice-versa, the heat pump will restart
after 10 minutes.
Good to know
4.5 Choice of operating mode
4.6 Setting the required temperature
Step 1 :
Go to the main menu by unlocking the control
panel.
Étape 2 :
Presse the button
to switch between the 3
operating modes: Eco Inverter, Boost Inverter, refroidisse-
ment.
WARNING:
Before starting, ensure that the filtra
-
tion pump is operating correctly.
ECO
IN
OUT
SET
h
1
ON
OFF
2
3
min
°C
%
A
h
min
°C
%
A
ECO
IN
OUT
SET
h
1
ON
OFF
2
3
min
°C
%
A
h
min
°C
%
A
Step 1 :
Go to the main menu by unlocking the control
panel.
Step 2 :
Press buttons
and
to change the set
temperature.
Required
temperature
Current water
temperature
