poolstar HL-B200C, Руководство по установке

Страница: 22 / 84

20
15 1 Top bench panel (foldable)
16 1 Low bench braket
17 1 Low bench
18 1 Side bench
19 1 Sauna stove support bracket (with water tray)
20 1 Sauna stove grill (three parts per set)
21 1 entrance step
22 1 Door handle
23 1 Rain coat (gray)
24 2 Water nose
25 77 Asphalt shingle (grey)
26 3 Wire cover
27 1 Control box
28 1 Top filling slat (10mm)
29 1 Top filling slat (15mm)
30 1 Top filling slat (20mm)
31 28 Special corner slat (70x38mm)
Installation
Read the assembly instructions carefully before starting.
Choice of location
Holl’s saunas are designed solely for exterior installation.
Select a space:
• In a dry area, on a flat stable surface that can support the weight of your sauna.
• The height must be sufficient for you to reach the ceiling and carry out electrical connections and maintenance.
• Away from any source of water, flames or flammable materials.
Practical advice
• Note that sauna assembly requires 3 adults.
• Clearly identify each panel before you begin
• During assembly, position your sauna’s mains cable so that it is easily accessible.
• Note that there are variations between the models.
•
•
•
Tools needed
Screwdriver Tape measure
Step ladder
Pencil Cutter
2 Spanner
(19 mm) Electric
screwdriver
Mallet
Wood spiral drill
Allen Wrench
IMPORTANT :
Please check the countersink and hole diameter of the drill holes to avoird damaging the wood.
The minimum room height required for installation is 2020 mm.