PoolScape ENDEAVOUR PREMIUM, Руководство пользователя

Страница: 15 / 20

14
FIXING THE LEAF SKIMMER
Unpack your skimmer box from the carton. Carefully read the POOL LEAF SKIMMER instruction
manual before you start to mount the skimmer box onto the pool wall.
Mark the position of the hole with a cross shaped cut in the centre of the opening. Allow for a little over-hang
off the remaining liner from the inside of the skimmer box and Inlet and outlet openings
(See diagram 31A, 31B)
FILLING THE POOL WITH WATER
Before you fill the pool with water, thouroghly check to see if there are any loose screws, holes or tears in the liner.
Fill the pool until it is half way acroos the skimmer box openeing or to the maximum water level or a minimum of 15c
from the top of the pool wall
(see diagram 32) to make sure water is entering the skimmer box opening.
WARNING! To avoid collapse, never leave the pool without water in it.
Warning! The Filter Pump must be switched off if there are swimmers inside the pool!
Follow assembly instructions for the professional Sand Filter Pump Combo.
WARNING! Cutting more than necessary will damage and void the pool liner, so please do it with extra care.
Follow the installation instruction manual of the skimmer Box to install the skimmer box to the pool wall.
Carefully trim off any protruding part of the liner within inside the connections after installation.
Caution! Do not damage any part of the inside of the Skimmer box and Inlet and Outlet connections with the knife.
(Diagram 31A) (Diagram 31B)
(Diagram 32)
around the edge. Attach the Skimmer Box and the Inlet and Outlet hose connectors. Use a sharp knife to trim