Pool Controls Chemigem CM55, Руководство пользователя

Страница: 29 / 36

Page 27
If the required HOURS figure is bypassed, keep pressing the keypad until the desired time
is reflected
After the desired
HOURS are chosen, select MINUTES using keypads
“ORP” or “pH”
Press ENTER to select the desired MINUTES .
When the correct time is set select OK using keypads
“ORP” or “pH” - Press
ENTER
Press ESCAPE 4 times to get back to the main menu
Changing Period Settings
– Pump Off
The unit has been pre-set to DAILY - Press ENTER
TIMERS will flash on screen - Press ENTER
Enter the pin number if ENABLED
PUMP will flash on screen - Press ENTER
Select P1 - Press ENTER
START will flash on screen
Press SELECT with keypads
“ORP” or “pH”
The options can be seen in the top right-hand side of the screen. Scroll through the
different options using the
ENTER keypad and select OFF to turn off the pump or the
option required for a different period (Refer below for an explanation of the abbreviations)
Press
ESCAPE 4 times to get back to the main menu