Pony Espresso T 134, Инструкция по эксплуатации, Страница: 3 / 25

PONY ESPRESSO T MODEL
•
The quality in the cup of a perfect espresso is obtained by using some components of professional coffee
machines which ensure a thermic stability and a constant infusion pressure
•
Hot water and cappuccino outlets according to model
Easiness for use and cleanliness thanks to the patented system of the cup holder with automatic ejection of
doses
•
4-liter tank: about 40 cups between two fillings
•
Safety of water lack: the machine stops to protect the pump
•
Integrated cup warmer to enjoy your espresso at the best temperature.
•
Metallic manufacturing of semi-professional type
Easiness for installation: an electric plug is sufficient.
INSTALLATION
•
SITING
The machine must be sited on a flat even surface. The position must be ventilated correctly.
A free space of 5cm (2 inches) must be left all round the machine.
•
ELECTRIC CONNECTIONS
Earth connection is mandatory.
The electrical supply must be protected and rated according to prevailing local standards,according to the following data:
MODEL Tension Frequency Power Current
PONY T 134 (COFFEE - STEAM - HOT WATER) 120 V 60 Hz 1800 W 15 A
The machine is not to be operated at any other voltage than described on the name plate.
Always check before switching on.
•
ASSEMBLING THE ACCESSORIES
The loose fittings accessories are supplied in a separate box. Follow Fig. 2 & 3 for their assembly and the following
instructions:
−
filter-holder (Fig. 2)
The assembly and fitting to the machine is carried out by following Fig. 2.
The filter (B) must be pressed into position in the holder (C) until stop.
The holder (C) must be placed into its turning support (D) as shown on Fig. 2.
−
Steam tube (according to model) (Fig. 3)
The (K) set must be screwed with the gasket (J) on the steam outlet pipe (H).
Fig 2 Fig 3
K
J
H