25
Version 2.1
Update: April 2016
PONSEL Mesure
– Aqualabo Contrôle
35 Rue Michel Marion
– 56850 CAUDAN, FRANCE
Tel.: +33(0)2 97 89 25 30
– Fax: +33(0)2 97 76 55 72
6. Programming
6.1 Main menu.
From the home screen, access the main menu using the
icon.
Icon
Functionality
This menu is dedicated to PONSEL digital sensors and is used to set up the 2 digital
inputs, including: the sensor detection function (SCAN), the setting-up of the
parameters measured by the sensors, the calibration of the sensors and the setting of
each sensor's Modbus address.
This menu is used to set up the two On/Off inputs for the washing, Event, Alert, etc.
functions.
This menu is used to select voltage or current for the analog inputs.
This menu is dedicated to configuring the ACTEON 5000 and is used to: set-up the
screen; consult the hardware/software version and the events log; set the date/time
and language; return to factory settings and set a password.
This menu is used to set up the optional Ethernet digital output and the MODBUS
functionality.
This menu is used to set up the two relay outputs in alarm/fault mode or based on
thresholds.
This menu is used to set up the two analog outputs for the 0/4-2 mA or PID linking
functions.
This menu is used to set up the recording/exporting to a USB stick function.
6.2 Description of the menus.
6.2.1 Configuring the digital inputs.