22
Version 2.1
Update: April 2016
PONSEL Mesure
– Aqualabo Contrôle
35 Rue Michel Marion
– 56850 CAUDAN, FRANCE
Tel.: +33(0)2 97 89 25 30
– Fax: +33(0)2 97 76 55 72
5. Setting up
5.1 Initial start-up.
When the transmitter is switched on, the home screen (i.e. the main measurement screen) appears
with no indication of the sensor(s) installed if no sensors have yet been configured.
If the sensors connected have already been configured, measured values may be displayed (primary
and secondary parameters).
As an initial step, the operator can set the display language, the date format and the date and time.
Setting the language:
To access the language menu, follow the sequence shown below from the home screen:
At the home screen, select the Main menu icon, then the Device settings icon, and finally the
Language icon.
Setting the date and time:
From the Device settings menu, select the Date/hour settings icon.
Option
Description
Format
Used to set the date format: the options are DD/MM/YY, YY/MM/DD and
MM/DD/YY.
Place the pointer on the "Format" line using the up and down navigation icons, then
select the Confirm icon.
Date
Select the "Date" line, press the confirm icon and then set the date by changing the
values on the screen which, in order, correspond to the day, month and year. Use
the up and down navigation icons to change the numbers and the Confirm icon to
move from one variable to another.
Hour
Used to set the time: select the "Hour" line using the up and down navigation icons,
press the Confirm icon, then set the hour and minutes.
Summer/winter
time
To activate/deactivate automatic change-over to summer or winter time, select the
"Summer/Winter time" line, confirm with the Confirm icon and select "Yes" or "No".
