Ponovo NF802, Руководство пользователя

Страница: 6 / 40

NF802 Intelligent Relay Tester User Manual 6
1.3 Features

8 channel fiber optic ports to send/receive the sampling value based on
IEC61850-9-1/2.

Each fiber optic channel can send 6 groups of SMV, 12 groups of GOOSE, receive 5
groups of GOOSE and receive/send IEEE1588 messages.

The 1
st
~8
th
fiber optic channel can be used to receive optic power measurement.

8 channels of SMV outputs based on IEC60044-7/8 (FT3)

8 channels of simulating collector for output IEC60044-8 message.

12 channels of low level output terminals for testing the relays with low level input.

Analyze the SCD, ICD, CID and NPI files to configure the SMV, sampling channel and
GOOSE messages.

SMV, GOOSE configuration information can be saved for repeated use.

The virtual terminal checks the GOOSE communications.

SMV detection to record and analyze abnormal message;

Simulate the abnormal SMV (shake, dropped frames, abnormal data and serial
number deviation, etc)

Simulate the abnormal GOOSE (dropped frames, repetition, timeAllowedtoLive invalid,
clock failure, etc), and make SOE test of MU.

Communicate with the relays and get the SMV and report by MMS.

GPS, IRIG-B and IEEE1588 timing functions.

Automatically obtain PC’s IP and keep itself in the same network as PC.