PONNDORF Gerätetechnik GmbH
Leipziger Strasse 374
D - 34123 Kassel
Operation manual
Hose Pump type
P_high pressure 65
Page 19 of 26
Version 002_GB / 05.2017
6.5 Installing / changing the pump hose (work steps)
1)
Unscrew drain plug to remove the
lubricant bath and collect the liquid.
2)
Unscrew counter flanges on suction
and discharge side.
3)
For installed pump hose if necessary
use lifting screws.
4)
Switch on the drive to remove the
hose.
The rotating pump pushes out the
pump hose.
CAUTION: Do not put your hands into
the pump casing!!
CAUTION: SWITCH ON THE DRIVE ONLY WHEN THE CASING COVER IS MOUNTED!
