PONNDORF P Classic 10, Руководство по эксплуатации

Страница: 17 / 34

PONNDORF Gerätetechnik
GmbH
Leipziger Strasse 374
D - 34123 Kassel
Operation manual
Hose Pump series
P_classic / PC-S
Page 15 von 30
Version 005_GB / 04.2021
5.3 Diagram of the leakage detector for operating the pumps in non-
hazardous locations (art.-no. 93-000-009)
The following diagram is only valid for the leakage detector consisting of:
• capacitive proximity switch (make: Rechner)
• switch amplifier (make: Rechner)
The switch amplifier must not be used in hazardous locations.
It has to be strictly installed outside of these areas.
The connections must only be made by qualified and
authorized personnel!
A1
– switch amplifier type N-132/1-01
B1
– capazitive sensor (2-wire NAMUR)
F1
– control fuse
F2
– motor fuse
F3
– motor protection relais
H1
– control lamp-operation
H2
– signal horn, signal lamp
K1
– motor contactor
K2
– flasher relais 0,5 sec.
M
– motor – pump drive
S 1
– double push button