8
6. Operating Instruction For The Products
6.1 How To Charge
The Product Has A Charging Protection Function, And It Will Automatically Stop
Charging, After The Product Is Fully Charged According To The Normal Charging Operation.
In Order To Avoid Other Unexpected Events, It Is Recommended To Disconnect The
Charging Connection In Time After The Product Shows It Is Fully Charged. While It Is Used, It
Needs To Be Charged, If The Output Power Is Less Than 100W, The Product Will Be Fully
Charged Gradually According To The Internal Battery Cell Capacity, If The Output Power Is
Greater Than 100w, The Product Will Slowly Run Out The Internal Battery Capacity, And The
Product Can Be Used Normally After The Full Charge.
The Product Designs Two Charging Interfaces, The Leftmost Input Interface And The
Cigar Lighter Interface Of The Dc Area. The Input Interface Supports Adapter Charging Or
Solar Panel Charging That Meets Voltage Requirements (17-25V). The Interface Of Cigar
Lighter On The Left Side Supports Vehicle Power Supply Charging With 12.5-16V (This
Interface Is Also The Discharging Interface Of Cigar Light In The Dc Area). After Any
Charging Mode Is Activated, The Display Area Of Charging Mode In The Display Screen Will
Flash The Icon Corresponding To The Charging Mode, And They Are “DC->”, “Car->”, “PV->”,
Which Means The Adapter Charging, Vehicle Power Supply Charging, And The Solar Panel
Charging. At The Same Time, The Power Of Battery Will Be Indicated In The Form Of The
Horse Race.
6.1.1 Solar Power Charging
Insert The Plug Of The Unfolded Solar Panel Into The “Input” Interface, The Screen Displays
“PV->” Flashing, The Icon Of Battery Scrolling Displays And The Remaining Time Of Fully
Charging Is Displayed. The Solar Panel Power Is Greatly Affected By The Light, And The
Generated Power Will Change, So It Can Result In The Remaining Time Dynamically
Changes, Which Is Normal.
6.1.2 Adaptor Charging
Step1. Insert The Adapter Ac Input Plug Into The Electric Supply, Step2. Insert The Adapter
Dc Output Plug Into The “Input” Interface, The Screen Displays “DC->” Flashing, The Icon Of
Battery Is Scrolling Displayed, And The Remaining Time Of Fully Charging Is Displayed.
When Charging Is Started, The System Will Automatically Detect The Input Power, The
Remaining Time Will Change Dynamically, Which Is Normal.
