(depending on model). Cut the inlet hose to the size appropriate to the size of hose
you are using. Then connect the hose from your pump to your filter system or position
it where you want the water to return. Ensure a watertight seal by the use of hose
clips.
42000, 52000
Pump is supplied without a hosetail or filter cage. Retailer to supply separately.
MAINTENANCE
To clean the pump, remove the back cover, sealing cover and the rotor/impeller.
Use a small brush or stream of water to remove any debris. Note: pump shaft can not
be removed. If the pump does not work, check the following:
- Check the circuit. Please try unit on another power socket.
- Check the pump outlet and tube. Algae and dirt may block them up
- Check the inlet to ensure not clogged by debris.
- Remove the pump inlet to access the impeller. Turn the rotor to check if broken or
jammed.
- Monthly maintenance
prolongs your pump’s life. Clean rotor, remove the dirt.
etc
NOTE: Ensure the electrical cord
loops below the power socket like a “Drip Loop”. It
will prevent the water from running around the cable into the power socket
Limited Warranty
This product is guaranteed for a period of 36 months (excluding rotor assembly) from
the date of purchase for material or manufacturing defects. The guarantee covers the
substitution of defective parts. However, the guarantee is considered null and void in
the case of improper use, improper handling or negligence on the part of the buyer. If
your pondXpert pump fails please take it back to the retail outlet from where it was
purchased. You will be required to take your receipt/proof of purchase with you. This
does not affect your statutory rights.
