Fig. A) VariFlow Submerged
Fig. B) VariFlow Dry Mounted
Pump can be positioned underwater (fig. A) or dry-mounted (Fig. B)
General safety Instructions
Read and observe all of the instructions clearly before installing, connecting and
operating the pump. Make sure the pump is securely and correctly installed before
switching on.
Always disconnect the pump when not in use and when carrying out maintenance.
Always disconnect all equipment in the pond before starting to handle, maintain,
repair or install any pond equipment.
The appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
For safety reasons, servicing or repair of this item should only be carried out by
PondXpert.
Never hang or carry the pump by the power cord.
Do not operate the pump with a damaged cord or plug. The supply cord of the
appliance cannot be replaced.
If the electrical cord is damaged the product should be scrapped.
Safety and Electrical Connections
This unit is designed for outdoor use only. Take care to ensure that you can easily lift
your pump out of the water for routine maintenance. If this is necessary do not pick
your pump up by the electrical cable but by the main body/ cage of the pump.
Always disconnect all equipment in the pond before starting to handle, maintain,
repair or install any pond equipment.
The pump is electrically operated so great care must be taken during installation and
operation. The following electrical and safety guidelines must be carefully followed.
Each pump is supplied with an 8 metre length of 3 core electrical cable which is
permanently connected to the pump.
Safe Operation Conditions
The pump maximum operating depth is 1.5 meters. (2m for 42/52000).
Pump can handle solid particles up to 6mm.
Pump can be used in salt or freshwater conditions.
The LCD Control Unit is weatherproof and there are four slots on the unit to provide
the opportunity for wall fastening. For longer life it is advised that the unit is sheltered
and protected as much as possible from the weather to prevent UV damage or water
ingress.
