PondMAX 24PL684, Инструкция по эксплуатации

Страница: 6 / 16

WAT E R G A R D E N I N G T O T H E M A X P O N D M A X . C O M
PHOTOCELL LIGHT SENSOR (OPTIONAL)
The Photocell Light Sensor is an item purchased separately to provide your PondMAX lighting system with the ability
to turn on automatically at dusk and turn off at dawn.
WARNING:
•
Do not submerge the photocell sensor.
• Ensure that irrigation is not directly spraying the
photocell sensor.
INSTALLATION
• The dusk-till-dawn photocell sensor (3) comes with an additional 3ft. transformer adapter cable (2). This adapter cable
must be used to connect the photocell from the “Inlet” port, directly to the transformer (1).
• Then use the 3ft. transformer adapter cable (4) that is provided with your light, to connect to the “Outlet” port of the
photocell sensor (3).
• Tighten the rubber nuts to ensure safe connections.
• Mount the photocell sensor 12 inches (0.3M) above the ground and at least 10ft. (3.5m) from the water feature.
• Make sure that the photo eye on top of photocell sensor is fully exposed to the daylight and is clear of any foliage.
Also make sure it is free from the beam of any lights, which may be on at night. This will prevent it from working
correctly.
MAINTENANCE
• Do not submerge the photocell sensor.
• Keep the photocell lens on top of the unit clean from dirt and other debris.
* ALL PICTURES SHOWN ARE FOR ILLUSTRATION PURPOSE ONLY. ACTUAL PRODUCT MAY VARY
1.
2.
3.
4.
5
AVERTISSEMENT:
• Ne plongez pas le capteur de cellule photoélectrique.
• Assurez-vous que l'irrigation ne pulvérise pas directement
le capteur de cellule photoélectrique.