PLEASE CALL 1-888-755-6750 BEFORE RETURNING TO THE STORE.
WWW.THEPONDBOSS.NET
8. Assembly the anchoring Flange into the tank flange to
securely seal the liner to the tank, carefullly install the
screws snug, finally remove the temporary nails and attach
the last two screw. Fig. 8
Fig. 8
9. For maximum water flow, it is recommended that the largest
tubing size for your pump is used. If using 1 in. ID tubing,
proceed to step 10. If using 1-1/2 in. ID tubing, cut the
adapter as shown using a hacksaw. Fig. 9
Fig. 9
10. Assembly coupler, gasket and adpter to tank. Fig. 10
Fig. 10
11. Put bio media balls with bag inside tank Fig. 11
Fig. 11
Diverter valve
Coupler
Cut ring
Adapter
Tank
Gasket
Bio media
balls with bag