Polytron 5741690, Руководство пользователя

Страница: 24 / 28

24
6.5 Men
u item “Outputs“
In the menu item
“Outputs“
in the submenu
“IP“
, the streaming data of the IP streams will be set.
In the monitoring section
“Status“
, the bit rate of the output signal will be displayed.
In the
„Multicast, RTMP and HLS settings“
, the setting of the streaming parameters will be done.
Multicast settings
Protocol Selection of the multicast transport stream protocols RTP or UDP
Service name Is taken from the encoder data
Enabled IP Stream activated or deactivated
Dest. address Setting of the destination address of the IP stream
Dest. port Setting of the destination port of the IP stream
RTMP settings
Service name Is taken from the encoder data
Enabled IP Stream activated or deactivated
Dest. address Setting of the destination address of the IP stream (RTMP address: URL + private key)
e.g. rtmp://a.rtmp.youtube.com/live2/qxjd-uaps-zfk6-550v
HLS settings
Service name Is taken from the encoder data
Enabled HLS Stream activated or deactivated
Hosts Setting of the IP address e.g. xxx.xxx.xxx.xxx