Polytron 5741690, Руководство пользователя

Страница: 18 / 28

18
3 1
4
5 6
4. Function elements
1 Power supply connector
2 Reset button (Factory settings)
3 HDMI input
4 Status LED HDMI signal
5 HDMI loop through output
6 IPTV and NMS interface - RJ45
5. Mounting
Firstly, please read the mounting and safety instructions in section 1. The installation of the receiving system must
be done in accordance with the standard IEC 60728-11. That ensures the safety of personnel and prevents
equipment damage by lightning or other sources of overvoltage. The streamer must be mounted vertically on a non-
flammable wall or in installation housing with the connectors (HDMI/IP) accessible from below. The modulator must
have at least 15 cm clearance from the top, front and bottom after installation. The installation slots should be not
covered by objects. Otherwise, ventilation of the device will be impaired and may cause damage. Connect the HDMI
input to the HDMI source and the IP output to the RJ45 connector. Before activation for first time, the streamer must
be integrated into the equipotential bonding. The HDM 1 IP is powered by an external 12V power supply. Do not
connect the streamer’s power supply to the mains until all cables are fully connected to the converter. After
connecting the streamer to the mains, please wait until the power supply LED lights up green, this can take uo to 2
minutes.
15 cm
15 cm
= Heat accumulation!!!
15 cm
2