PolySciences 3025 series, Инструкция по эксплуатации

Страница: 15 / 22

3025
Figure 15
11
4-1 Turning on the Lamp (Figure 15)
Connect the power cord, turn on the main switch (Figure
15) to the on position “--”
NOTE: The switch adjacent to the main switch is
non-functioning.
4-2 Adjusting Illumination Intensity (Figure 16)
Adjust the illumination intensity by rotating the variable
intensity dial.
   
Use of the lamp at a lower intensity will prolong its
life.
4-3Adjusting Tension Adjustment Collar
(Figure 17)

The tightness of the tension adjustment collar is
factory adjusted. If the collar loosens or the
mechanical stage drops by itself, adjust the tension
adjustment collar until the proper tension is restored.
Use the black adjusting wrench supplied with the
microscope to adjust the tension adjustment collar
Figure 16
Figure 17
Tension Adjustment Collar
Main switch
11