Polyprint PreTreater Pro, Руководство по установке, Страница: 6 / 24

3
PRETREATER PRO
• Pretreater Pro
®
Direct-to-Garment pretreatment machine
• Five (5) Nozzles
• Four (4) Empty Tanks
• Four (4) Gaskets
• Four (4) Blue Nozzle Holders
• One (1) Ultrasonic Device
• One (1) Power Cable
• One (1) Quick Installation Guide
• One (1) Quick User Guide
• One (1) Polyprint USB Key
• One (1) Registration Page
Caution:
• Place this product on a flat, stable surface. The surface, if not a
Polyprint stand, should be at least 670 x 790 mm and capable of
supporting more than 130kg.
• This product will not operate properly if it is tilted or in an angle.
• The machine must only be used indoors. Do not install or store the
PreTreater Pro, where it will be exposed to weather conditions.
• Avoid places subject to shocks and vibrations.
• Before moving the machine to another position, ensure that the
tank caps are sealed and liquid cannot spill out. Do not tilt the
pretreatment machine, while the liquid tanks are full or inside the
machine.
Note:
• Place this product near a wall outlet, where the plug can be easily
unplugged.
• Leave space on the right side of the machine, to have plenty ac-
cess to the tank compartment.
Items contained in the box