Polyprint PreTreater Pro, Руководство по установке, Страница: 17 / 24

14 WWW.
POLYPRINTDTG.COM
INSTALLATION GUIDE
Check that the
CL, L1 and/or L2 Tanks are full and that all four (4)
nozzles are properly placed into position.
1. Press
Confirm to continue with the liquid charge.
2. In case you installed pretreatment liquid in
L1 or L2 Tank, select the
one you filled.
3. In case you installed pretreatment liquid in both
L1, L2 Tanks, select
the one you wish to use first.
STEP 3
Fig.24: Check that the CL, L1 and/or L2 Tanks are full.
Fig.25: Pressing confirm.
Press
Confirm.
After a couple of seconds, the initial liquid charge will finish.
STEP 4
STEP 5