Email:
8
Website:
www.polypipe.com/ventilation
LAB1191R, Issue 1, May 2015
To start the last period of heat recovery in the day select
and press (OK)
(OK)
(OK)
(OK) to
validate.
Note: the time will automatically advance by 30 minutes (minimum switching period). In
the example below the start time of the last period of heat recovery is 18:00.
Adjust the hour of this step with ((((----)
)
)
) or (+)
(+)
(+)
(+).
Press (OK)
(OK)
(OK)
(OK) to validate and move to finish the programme setting of day 1 (Monday).
You can now choose to copy the program just created to subsequent days.
To copy the programme to the next day press (OK).
(OK).
(OK).
(OK). Should you wish to set a different
programme for the next day use select no with ((((----)
)
)
) or (+),
(+),
(+),
(+), and press (OK).
(OK).
(OK).
(OK).
Selecting no requires the above programming steps to be repeated for the next day.
When all 7 days are programmed the message “Save
Save
Save
Save” with the blinking green LED will
be displayed, press (OK)
(OK)
(OK)
(OK) to save and return to Auto mode.
Note: you can return to the previous value by pressing on the escape key ((((
)
)
)
) at any
time.
