User Manual—FS2000
Important Notice: Take away your finger after first successful capturing,
and press your finger on the prism again for second once. That means
for successful registration, the two places of fingerprint capturing
should not be the same.
Delete Fingerprints of All Users(Unlock the safe door before deletion,
then lock the bolts after the door is opened)
1. Press down the red delete button, and press the start button, the red LED
indicates that the system is ready for fingerprint deletion;
2. After one buzzing sound, the red LED will blink three times in a few
seconds, and the following long buzzing sound indicates the successful
deletion of all fingerprints.
L
Note: this operation will delete under all circumstances all fingerprints
stored in the memory, so please be prudent to use this function.
L
Precautions of System Setup
If there is no registered fingerprint, the door can be opened by pressing start
button only. So the system should be set up in a timely manner to prevent
the existence of any insecurity.
Please make sure that all the operation buttons have been reset after the
system setup is completed.
Please test the system after fingerprint registration, so as to ensure the
correct setup.
Take out the battery and plug in outer backup power supply, test
8
