PSW1-2000 - Handstand 2
January -2018
Page 3 of 4
Parts Drawing
s - Exploded Views
PC-000795
Serial ID Plate
(2)
PC-000105
Rivets
PC-100421
- Drain Plug Assy
PC-000241
- 1” O-Ring
PC-000418
- UniSeal
PC-100421B
- Drain Plug Body
PC-100421P
- Drain Plug
PC-000581G
-
Sink Tap
(2)
PC-000107
- Rivet
(2)
PC-000106
- Washer
PC-000554
- 1" Fill Plug
PC-000345
- 1” O-Ring
PSE2-0001
Sink Tank
PS02-0003
- Foot Pump Plate
(2)
PC-000147
- Screw
CT38-003
3/8" Tubing x 3" Long
PC-000415
Rubber UniSeal
CH075-037
- 3/4"
Drain Hose 37" Long
CT38-046
- Tubing
3/8" O.D. x 46" Long
PC- 000339
Elbow 3/8" Tube x 3/8" Npt
PC-000325
- Straight
1" Npt x 3/4" Barb
PC-000351
-
#10
Hose Clamp
PC-000600
- Baby Foot Pump
(4)
PC-000102
- Rivet Small Flange
(4)
PC-000106
- Washer
PSE2-1000 - PARTS DIAGRAM
http://www.polyjohn.com/pc-000600
http://www.polyjohn.com/pc-100421
http://www.polyjohn.com/pc-000581G
http://www.polyjohn.com/pc-000554
http://www.polyjohn.com/pse2-0001
http://www.polyjohn.com/ps02-0003
http://www.polyjohn.com/ct38-003
http://www.polyjohn.com/pc-000415
http://www.polyjohn.com/ch075-037
http://www.polyjohn.com/ct38-046
http://www.polyjohn.com/pc-000325
http://www.polyjohn.com/pc-000351/
http://www.polyjohn.com/pc-000339
http://www.polyjohn.com/pc-000795
http://www.polyjohn.com/pc-000102
http://www.polyjohn.com/pc-000147
http://www.polyjohn.com/pc-000106
http://www.polyjohn.com/pc-000241
http://www.polyjohn.com/pc-000418
http://www.polyjohn.com/pc-100421b
http://www.polyjohn.com/pc-100421p
http://www.polyjohn.com/pc-000107
http://www.polyjohn.com/pc-000106
http://www.polyjohn.com/pc-000345
http://www.polyjohn.com/pc-000105
Soap Dispenser
To fill the soap dispenser, open it by turning the lid counter
clockwise and lift up. Fill with 30 fluid ounces (or desired
amount) of liquid soap, place the lid back on, and turn clock-
wise to lock the lid in place. To remove the dispenser for
cleaning, remove the lid, and locate the tab on the middle of
the mounting plate at the rear of the dispenser. Push in on
it, and slide the dispenser up, and off. The lid can be secured
back on the dispenser for storage.
Winterizing
• Drain all water from the tanks.
• Flush tank with a solution of chlorine and water.
• Depress the foot pump to run the clorine solution through the lines.
• Drain all water from the tanks and while the drains are open, continue to pump
the foot pumps to clear all of the liquids from the lines.
