OWNER′S MANUAL
3
EXTENDER KIT SETUP INSTRUCTIONS
2. Unlock the lock nut, and pull apart the plugs to reveal the male connector.
3. Save the power adapter for future use.
5. Locate the add-on connector of the second kit.
Open the protective cap to reveal the female connector.
7. Push the ground stake into the ground (soil/lawn) at your
desired spot.
4. Take the second kit out from the box, and insert ground stakes into
LED lights.
6. Connect the two kits together. Tighten the lock nut to secure the
connection.
1. Locate the extension cord and ground stakes of the first kit.
8. Plug it in to the wall outlet.
Ground Stake x 3
* You can use or remove the extension cord as you need
9. For best signal quality/reception, make sure the controller
is placed on a raised area free of obstacles.
TIP: Simply use the remote control to enjoy the
color spectacle. Please see REMOTE CONTROL
INSTRUCTIONS.
