While scanning the object FlexScan3D tracks the alignment of the object that is being scanned.
If the alignment fails, go back to a previously captured area of the object. The scanner contains
visual alignment aids and FlexScan3D provides audio cues for a smoother scanning
experience.
Once done scanning, hit the SCAN button on the H3 to end the scan and the FlexScan will
prompt if you need to save the scan data or not.
It is possible to set a cut plane while scanning. In order to set a cut plane, begin scanning and
hit the PAUSE button on the H3. Select the plane (holding Ctrl and selecting using the left
mouse button) which you need to set as the cut plane and click
SET.
Once the cut plane is set
you will be able to see the cut plane with respect to the object you are scanning like shown in
the image below.
You can resume the scan by pressing the
PAUSE
button and you will be able to scan without
capturing data for the surface plane.
After completing the scan, hit the
Finalize
button on top of the screen to get the final scan data.
Содержание H3
Страница 1: ...Getting Started Guide The H3 ...
