2. Setting up
In order, to download and install FlexScan3D, log in on
our website at
https://www.polyga.com/my-account/
.
Run Polyga’s Network Configuration Tool from the Start
Menu and select the
Scanner Default
preset to change
your port settings. Click
Apply
. Click
Test
to verify the IP
configuration was successful.
First, connect the 12V DC adapter to the H3 via the power
connector. Also, connect the RJ45 ethernet cable to the
computer and to the H3. Once all the necessary connections are
made, you will be able to power ON the H3 and add the scanner
on FlexScan3D.
Open FlexScan3D to add the scanner. Go to the
Scanners Panel
tab which is on the top left of
the screen, then click on
New
to add the scanner. In the
Scanner Type
drop-down menu, select
the type of scanner which
you
have purchased. The scanner will be showing up if all the
connections are correct. Select the scanner and hit
OK
.
Содержание H3
Страница 1: ...Getting Started Guide The H3 ...
