different playback rates, your sample pool capacity may vary.
The Main/headphones output is stereophonic.
Scales
In this menu, you can locate the musical scales filter settings. This filter has a global
influence, both on MIDI output and input, but also on the View mode input controller. It gives
you access to:
Enabling the musical scale filter (see a list in the appendix).
Setting the desired musical scale filter.
Selecting the Root note.
Important:
When a scale filter is applied, the available notes will be confined to the selected scale.
The musical scales filter function is not limited to the View controller.
A selected musical scale will influence all the existing sequences and the MIDI notes
output, as well.
When changing the track root note or scale, the notes in each step will be adjusted to fit
the new scale – each being transposed up by one or two semitones.
Using a scale on an existing sequence will quantize all of its notes and chords to that
selected musical scale.
If a scale filter is turned on, the Repeat tool is filtering notes to the chosen musical
scale.
MIDI
Available MIDI input/output controls:
CC Mapping > select specific CC settings for particular MIDI channels for both Jack and
USB ports. Allows you to set the following options:
CC numbers for Cutoff/Resonance, Sample Attack/Decay, Reverb/Delay send
Overdrive/Bit Depth knobs.
