IM-A1 Ice Maker
E&OE
© 2017 Polycool
8
Making and Dispensing Ice and Ice Water
If ice is made and left in the appliance, it may eventually melt
– when melted, the water returns to the
water reservoir. Be careful to avoid overflow from the water reservoir due to melted ice adding to the
current reservoir contents.
• Ensure that adequate water is in the water reservoir when making ice / ice water.
• It takes several minutes to create each batch of ice cubes, and this is also affected by the ambient
temperature
– do not expect instant ice or ice water to be available. To monitor ice production, open the ice
reservoir lid and view production from there
– do not allow the cover to remain open, and close it as soon as
possible in order to retain ice-cold temperatures in the ice reservoir.
Switch the ice making function ON using the
ON / OFF
button. When on,
displays. The appliance draws
water up from the water reservoir into the cooling unit, creates the ice, drains excess water back into the water
reservoir, then moves the ice into the dispensing area. When the ice dispenser button is pressed, ice is moved
into the dispenser chute and falls out. Use a glass or other container to catch the dispensed ice.
For ice water, place a glass or other container under the water dispenser, then press the
WATER
button.
Water will be dispensed for as long as the button is pressed and there is available water.
This image shows water in the
ice making tray and ice forming
on the cooling elements. When
the ice cubes are ready, the
remaining water is returned to
the water reservoir, the ice drops
from the cooling elements and is
shifted to the ice reservoir by a
"comb".
