Polycom Desktop V700 Reference Guide
T
he diagram to the left illustrates the Polycom Remote
Control and highlights some of the more commonly used
buttons that are supported in OTN videoconferences.
Call:
The call button is used to initiate a point-to-point
videoconference.
Hang up:
The hang up button is used to end a point-topoint
videoconference.
Snap:
The snap feature should be disabled and is not
supported.
Directory:
The directory button is used to access the
Global Address Book.
Directional Arrows / Select Button:
The directional
arrows are used to navigate the menu screens. The
select button is used to select an item in a menu.
Home:
The home button is used to bring up the menu
screen.
Zoom:
The zoom button is used to move the camera
in/out.
Volume:
The volume button increases/decreases the
incoming volume.
Far/Near:
The far/near buttons are used to switch
between far and near camera modes.
Mute:
The mute button mutes the outgoing sounds from
your site.
Auto:
The auto feature should be disabled and is not
supported.
Camera:
The camera button will allow the user to select
other input devices (i.e. the AMD Patient Camera)
Preset:
The preset button is used to set camera and
device presets.
Delete:
The delete button is used to delete camera and
device presets.
Number Keys:
The number keys are used to select
presets; the corresponding alphabetical keys are used in
the directory to jump to sites starting with each letter
when initiating a videoconference.
Graphics:
The graphics button is used to display an
image from a laptop that is connected to the
videoconference system.
2.2 | OTN Training Services
