Polycom SoundPoint IP 500, Руководство администратора

Страница: 43 / 166

Administrator Guide - SoundPoint
®
IP / SoundStation
®
IP Features
Copyright © 2005 Polycom, Inc. 35
3.1.22 Shared Call Appearances
Calls and lines on multiple phones can be logically related to each other. A call that is
active on one phone will be presented visually to phones which share that call appear-
ance. Mutual exclusion features emulate traditional PBX or key system privacy for
shared calls. Incoming calls can be presented to multiple phones simultaneously. This
feature is dependent on support from a SIP server which binds the appearances
together logically and looks after the necessary state notifications and performs an
access control function. For more information, see 5.2.4 Shared Call Appearance Sig-
naling on page 149.
See the following table for further information.
Local
Web Server
(if enabled) Specify the default number of calls which can be active or
on hold per line key and the number of calls per registra-
tion which can be active or on hold per line key assigned
to that registration. Navigate to:
http://<phoneIPAddress>/appConf.htm#ls and
http://<phoneIPAddress>/reg.htm
Changes are saved to local flash and backed up to < Ether-
net address >-phone.cfg on the boot server. They will per-
manently override global settings unless deleted via the
Reset User Settings menu selection.
Local Phone User
Interface Specify per-registration the number of calls which can be
active or on hold per line key assigned to that registration
using the SIP Configuration menu. Either the Web Server
or the boot server configuration files or the local phone
user interface should be used to configure registrations,
not a mixture of these options. When the SIP Configura-
tion menu is used, it is assumed that all registrations use
the same server.