Polycom SoundPoint IP 500 Скачать руководство пользователя страница 112

Страница: 112 / 166

Administrator Guide - SoundPoint IP / SoundStation

Optimization

104

4.6.1.9.2.2 Call Control <CallControl/>

These parameters apply to call control packets, such as the network protocol signaling.

4.6.1.10 Basic TCP/IP <TCP_IP/>

4.6.1.10.1 Network Monitoring <netMon/>

Do not alter these values.

4.6.1.10.2 Time Synchronization <SNTP/>

The following table describes the parameters used to set up time synchronization and
daylight savings time. The defaults shown will enable daylight savings time for
North America.

Daylight savings defaults:

• do not use fixed day, use first or last day of week in the month,
• start DST on the first Sunday in April at 2 am,

Attribute

Permitted
Values

Default

Interpretation

qos.ip.callControl.min_delay

0, 1

If set to 1, set min-delay bit in
the IP TOS field of the IP
header, or else don’t set it.

qos.ip.callControl.max_throughput

0, 1

If set to 1, set max-throughput
bit in the IP TOS field of the IP
header, or else don’t set it.

qos.ip.callControl.max_reliability

0, 1

If set to 1, set max-reliability bit
in the IP TOS field of the IP
header, or else don’t set it.

qos.ip.callControl.min_cost

0, 1

If set to 1, set min-cost bit in the
IP TOS field of the IP header, or
else don’t set it.

qos.ip.callControl.precedence

0-7

If set to 1, set precedence bits in
the IP TOS field of the IP
header, or else don’t set them.

Attribute

Permitted Values

Default

tcpIpApp.netMon.enabled

0, 1

tcpIpApp.netMon.period

1 to 86400

Содержание SoundPoint IP 500


































































































































































Результаты поиска

Содержание SoundPoint IP 500

Отзывы:

Похожие инструкции для SoundPoint IP 500

Бренды по названию

Популярные бренды

Polycom SoundPoint IP 500, Руководство администратора

Результаты поиска

Содержание SoundPoint IP 500

Отзывы:

Похожие инструкции для SoundPoint IP 500

Бренды по названию

Популярные бренды