•
Restrictions and Recommendations
•
Helpful Hints
•
Identified Problems
•
On-line Documentation
•
Software Components
System and Network Requirements
You can install LiveManager 4.01 on the following minimum system configurations:
Gatekeeper Service:
•
Pentium 200 MHz
•
Windows NT 4.0 Server or Workstation with Service Pack 3 and TCP/IP
•
64 MB memory
Web UI Service:
•
Pentium 150 MHz
•
Windows NT 4.0 Server with Service Pack 3 and Internet Information Service (IIS) 4.0 with Front Page
Server extensions.
•
64 MB memory
If you install both components on the same NT server, it's recommended that the server have a minimum of 128
MB of memory.
Installing LiveManager 4.01
If you are installing LiveManager 4.01 on a system where LiveManager 3.0/3.1 is already installed,
you must first uninstall LiveManager 3.0/3.1:
1. Begin by copying the configuration and call history files into a temporary directory (such as
c:\temp
) outside of the
\livemanager
directory. The files you are interested in are
calls_*_*.log,
calls.log, livemgr.cfg, net_topo.top
(if it exists) and
did2tid.pbk
(if it exists).
2. Now uninstall LiveManager 3.0/3.1. Reboot the PC if necessary.
3. Create a
c:\program files\picturetel\livemanager
directory and copy the files into this directory.
4. Install LiveManager 4.01 into the directory created in step 3. One or more of the files copied
in step 3 will be slightly modified.
The installation program "
setup.exe
" for LiveManager 4.01 is found in the
\disk1
directory of the
installation files. The installation files are found on the distribution CD or in the PictureTel release
Web site.
LiveManager 4.01 consists of two major components:
1. Gatekeeper service