Polycom MGC-25, Руководство по началу работы

Страница: 64 / 136

MGC-25 Getting Started Guide
5-16
b. If you are defining an H.323 participant:
In the Participant IP box, enter the IP address of the participant’s
endpoint.
Alternatively, in the Alias Name field, enter the Alias of the
endpoint as registered with the gatekeeper and then select the Alias
Type. Only H323 ID (digits and letters) and E.164 (only digits) are
supported. Use this option if a gatekeeper is defined in the H.323
Network Service.
c. If you are defining a SIP participant:
In the SIP Address box, enter the endpoint address in the format:
[user name]@[domain] .
Note that the SIP URI adheres to URI rules: no spaces or special
characters such as commas, quotation marks, inverted tags and so
forth in either the name or the domain part.
7. In the User Defined fields, enter general information about the
participant, if required.
8. Select the Save Participant check box to save the participant in the
database for future invitations/conferences.
9. Click OK to add the participant to the conference.
To define a new video participant in a Video conference:
1. Perform steps 1-4 in the Audio Only participant definition procedure.
2a. If you are defining an ISDN participant:
For a dial-out ISDN participant using H.221 aggregation mode, enter the
phone numbers separated by semicolons.
For example, for a 2B participant: 9251921;9251922. If using Bonding
(both numbers are the same), enter the number once. Example: 9251921.
2b. If you are defining an H.323 participant:
Follow step 6b in the Audio Only participant definition procedure
(above).
2c. If you are defining a SIP participant:
Follow step 6c in the Audio Only participant definition procedure
(above).
Available only for Dial-out Connection Types and if Bonding is the selected
Aggregation method for the participant.