36
Chapter 2 System Management
Global Management System User’s Guide
Manage System
Polycom Video Endpoints
Polycom video endpoints have an embedded web server that allows you to manage the unit
from a remote PC on the same local area network. Any endpoint can be managed by calling up
it’s IP address in any web browser. To remotely manage a system through Global Management
System, select the system of interest in the system list and then click on the
Manage System
button. A new browser window will appear displaying the endpoint’s web page.
Remote Management allows you to:
•
Run diagnostic tests on a system
•
Change the system configuration for the endpoint
•
Place a call from the system for line status verification
Certain video endpoint models require specific setups in order to access the web interface. See
below.
ViaVideo
For versions below 5.0:
To manage ViaVideo, the “Web Access Password” must be set through ViaVideo. If the “Web
Access Password” is not configured, Global Management System cannot access the web
interface of ViaVideo.
To set the web access password from the ViaVideo interface, go to:
System Information > Setup > Global Services > Global Management
Enter the “Web Access Password”.
For 5.0 and above
To set the web access password from the ViaVideo interface, go to:
Setup > Web/GMS >
Enter the “Admin Password”.
iPower
iPower like the ViewStation also has an embedded web server that allows remote administration.
Manage System launches iPower WebRemote. WebRemote lets you make calls, configure the
system, diagnose operating problems, and monitor system performance from a web browser
running on a remote PC. In order to use WebRemote, it must be enabled on the system.
To learn how to enable WebRemote, refer to page 115.
Other System Management Functions
Содержание Global Management System
Страница 1: ...Global Management System User Guide ...
Страница 118: ...Appendix ...
