Polycom CX700 Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 62

background image

Safety Notices

Safety Notices - 3

Safety and Compliance

Usage and Cleaning

•

Use in accordance with these instructions.

•

Do not use near any heat sources.

•

Only use attachments/accessories specified by Polycom.

•

Clean only with dry cloth.

Operating Environment

This device is rated as a commercial product for operation at +41ºF (+5ºC) to +95ºF(+35ºC).

WARNING Electrical Safety

Failure to properly set up, use, and care for the Polycom CX700 can increase the risk of damage to the Polycom
CX700, or possible serious injury. To ensure personal safety, this product must be used with NRTL Listed (UL,
CSA, ETL, etc.), and/or CE marked Information Technology equipment.

Warning:

This equipment may become inoperable if electrical power fails or broadband internet access is

interrupted.

Any changes or modifications not expressly approved by Polycom could void the user's authority to operate this
device.

No serviceable parts included.

Disposal of Waste Electrical & Electronic Equipment in the European Union and Other
Countries with Separate Collection Systems

This symbol on the product or its packaging means that this product must not be disposed of
with your household waste. Instead, it is your responsibility to hand this over to an applicable
collection point for the recycling of electrical and electronic equipment. This separate collection
and recycling will help to conserve natural resources and prevent potential negative
consequences for human health and the environment due to the possible presence of
hazardous substances in electrical and electronic equipment, which could be caused by
inappropriate disposal. For more information about where to drop off your electrical and

electronic waste, please contact your local city or municipality office, your household waste disposal service, or the
shop where you purchased this product. Refer to

http://ec.europa.eu/environment/waste/weee/index_en.htm

for

additional information on WEEE.

FCC Part 15 Class B

This product was tested and complies with the limits for a Class B digital device under Part 15 of the U.S. Federal
Communications Commission (FCC) rules, and is subject to these conditions: It may not cause harmful interference

Canada ICES-003

and must accept any interference received, including any that causes undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Not intended for use in machinery, medical or industrial applications.

CE

This Polycom CX700 has been marked with the CE mark. This mark indicates compliance with EEC Directives
89/336/EEC and 2006/95/EEC. A full copy of the Declaration of Conformity can be obtained from Polycom Ltd, 270
Bath Road, Slough, Berkshire, SL1 4DX, UK.

«
...
57
58
59
60
61
...
»

Содержание CX700































































Отзывы:

Нет отзывов

Похожие инструкции для CX700

Бренд: myPhone Страницы: 2

Бренд: HTC Страницы: 2

Бренд: Chima Страницы: 105

Бренд: Ulefone Страницы: 47

Бренд: Cansec Страницы: 31

Бренд: Secur Страницы: 2

Бренд: LIKUID Страницы: 33

Бренд: Uniden Страницы: 44

OPENTOUCH ALE-300

Бренд: Alcatel-Lucent Страницы: 101

Бренд: Sagem Страницы: 61

Бренд: Archos Страницы: 180

SGH-a887 Series

Бренд: Samsung Страницы: 190

Бренд: Samsung Страницы: 219

vertis 4001 you

Бренд: Overmax Страницы: 26

Бренд: Sigma Страницы: 52

EuroMaster Systel

Бренд: DETEWE Страницы: 69

Бренд: Detection Systems Страницы: 60

Бренд: Nemsys Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды