Install the RealPresence Collaboration Server (RMX) 1800
Polycom, Inc.
21
Connect the RealPresence Collaboration Server (RMX)
1800 to a Power Source
The following restrictions apply to the conductors and connectors used to ground the unit when it is
rack-mounted:
●
Bare conductors, must be coated with an appropriate antioxidant compound before crimp
connections are made. Tinned, solder-plated or silver-plated connectors do not have to be prepared
in this manner.
●
The same bolt assemblies should not secure multiple connectors.
●
Listed fastening hardware must be compatible with the materials being joined and must prevent
loosening, deterioration and electrochemical corrosion of the hardware and joint materials.
To connect RealPresence Collaboration Server (RMX) 1800 to AC power:
r
»
Insert the power cable into the power connector on the rear panel of the RealPresence Collaboration
Server (RMX) 1800 system.
Connect Cables to the RealPresence Collaboration
Server (RMX) 1800
This section outlines the way to connect the cables to the RealPresence Collaboration Server (RMX) 1800.
To connect the cables to the RealPresence Collaboration Server (RMX) 1800:
1
Connect the management network cable to
LAN 1
port.
When LAN redundancy is enabled, LAN 1 is used for both the management and the media and
signaling network connection.
2
Connect the media and signaling cable to
LAN 2
port.
By default this port is used for signaling, but when LAN redundancy is enabled, LAN 2 is the backup
of LAN 1 port.
3
Connect the PRI cable into any
PRI
port.
Warning: Use only the Polycom-supplied AC power cable
•
Only the AC power cable supplied by Polycom should be used.
•
The size of the protective earthing conductor should be a minimum of 10 AWG.
•
The outlet intended for connecting the power cord must be protected with an external overcurrent
protection device, either in building or in the rack, with the rating not higher than 20 AMP.
•
Do not use an extension cord with the cable.
Note: PRI ports on RealPresence Collaboration Server (RMX) 1800 with three DSP cards
Only the RealPresence Collaboration Server (RMX) 1800 with three DSP cards with built-in ISDN
module provides PRI ports, as shown next.
