Polyaire Zonemaster Unipoint RF, Инструкция пользователя и руководство по установке

Страница: 17 / 24

ZONEMASTER UNIPOINT RF DAMPER CONTROL SYSTEM - Setup Guide Page
6f) Turbo
Using Turbo on a zone will give the zone a full
opening while all the other zones’s opening positions
are reduced by 50%. This will bring extra air into
the zone.
1)
At the setting mode in ‘Parameter’ screen, press
the or button to select ‘Turbo’.
2) Press and button to select the zone to
have a turbo feature.
6g) Naming zones
It is essential to put correct names against the zones
to make sure the end user is fully aware of the
location of each zone.
NOTE: do not leave the hand
control with just ‘Zone /Zone 2’. This will result
in customer confusion and disappointment with
the installation.
The name of a zone is called ‘Zone_addr’ in default
setting. For example, Zone 1, which has an address
of 1, is called ‘Zone_1’ on its factory default. The
names can be customised as you prefer as follows:
1) In Setting mode, press or button to
select ‘Naming’, and press button to enter
the sub menu of the naming screen.
2) Press or button to select the zone to
be named.
3) Press and button to select one of the
preset zone names for the zone.
4) If the user wants to make some changes to the
preset name selected, press the button to
initialize the change, and then press and
button to select the character that is highlighted.
5) Then use and button to change the
character as the user prefers. There are 26
letters, 10 numbers and a space to be selected
through this process.
6) Press button to exit the change process.
7) Press or button to select the next zone and
follow steps 3) to 6) to customize the name of the zone.