background image

Poly EduCart 2 Setup Sheet

7

18

Install the magnetic back cover over the codec and
cables and fasten with the two supplied screws.

If needed, attach a padlock to the storage basket.

Child Safety Warnings:

 

Death or serious injury may occur when children climb on audio

 

and/or video equipment furniture. A remote control or toys placed

 

on the furnishing may encourage a child to climb on the furnishing

 

and as a result the furnishing may tip over onto the child.

  Relocating audio and/or video equipment to furniture not

 

specifically designed to support audio and/or video equipment

 

may result in death or serious injury due to furniture collapsing

 

or overturning onto a child. 

Regulatory Notices and General Warnings:

 

This equipment is intended for indoor use only.

 

This equipment is intended to be suitable for institutional use.

   Do not use a power cord that is damaged. This could cause fire

 

or electric shock. Contact the manufacturer for a replacement

 

cord, if necessary.

   Only use a power cord which is appropriately rated and approved

 

relevant to the country of use.

   This equipment should be used only on even surfaces.

   This equipment has lockable wheels which should be applied

 

while the cart is stationary.

   When connecting to the mains supply, connect only to an

 

earthed supply outlet which is installed near the equipment

 

and is easily accessible.

   Keep ventilation openings free from any obstructions.

  The ambient operating temperature rating of this equipment is

 

0 - 40ºC and should not be exceeded.

   Do not immerse the system in any liquid or place any liquids on it.

   Do not spray liquids directly onto the system when cleaning.

 

Always apply the liquid first to a static-free cloth or wipe with a 

      disinfectant wipe.

   For further information concerning the individual components

 

of this equipment, please refer to the respective product

 literature.

   For support or service, please contact your Poly distributor

 

or go to Poly Support at support.polycom.com.

Weight:

EduCart 2 weight (without display): ~80 lbs (36.3 Kgs)

 

For more information about Poly G7500, go to

support.polycom.com/video

.

For more information about the Polycom EagleEye IV camera,
go to 

support.polycom.com/peripherals

.

Содержание EduCart 2









Отзывы: