PO Box 409 • Hanover, MD 21076 • Tel (410) 761-4000 • www.polyplanar.com
- 7 -
Poly-Planar
Bass 0
Poly-Planar
Treb 0
Poly-Planar
Space 0
Poly-Planar
Vol 15
Poly-Planar
LoudON
Poly-Planar
LimON
Poly-Planar
EQ ON 2
Rotate VOLUME control to
set the AUDIO parameters
Connecting the MZ-100 to an RD-44 control panel:
The MZ-100 can be controlled by the RD-44 control panel. Using an extension
cable (not shown) the panel can be up to 60 feet away from the amplifier. Plug
the RD-44 or its extension cable into the CONTROL PANEL plug on the MZ-100.
Be sure to tighten the waterproof connectors.
Controls and Screens when Connected to an RD-44 control panel
Screen
Button Description
Power On start-up screen
Volume is displayed 0 min
– 31 max
Push 1 time to adjust Bass
( -9 min to + 9 max, 0 = flat )
Push 2 times to adjust Treble
( -9 min to + 9 max, 0 = flat )
Push 3 times to adjust Stereo Spatial
Enhancement
0 = normal, 1 = wide, 2 = widest
Push 4 times to set Loudness ON/OFF
Enhances bass at low volumes
Push 5 times to set Limiter ON/OFF
ON prevents distortion at high volume
Push 6 times to set Equalizer ON/OFF
ON enables the equalizer selected by
the switches shown on page 5.
IMPORTANT NOTE:
The BLUE remote wire should
be tied to 12V (Red wire).
