ME-60 Expansion Amplifier
3
————————————————————————————
PO Box 409 Hanover, MD
TEL (410) 761-4000 www.polyplanar.com
poly-planar
Marine Audio Systems
Mounting the Volume Control:
1) Choose a mounting location with a flat surface the size of the volume
control body
2) There must be at least 1.73
” (44mm) of clearance behind the mounting
area
3) Drill a 1.00
” (25.4mm) hole making sure that there is nothing behind the
surface that could be damaged.
4) Run all cables, make connections, and test the entire system. Extension
cables are optionally available if required.
5) Position unit, remove film from foam adhesive, and adhere volume control
in place. Warning, the adhesive is very, very sticky so be sure that
everything is functioning, and the panel is positioned very carefully before
applying pressure.
1.20
”
(30.50 mm)
Drill 1.00”
(25.40mm)
hole
Figure 2 - Volume Control Mounting