POLTI vaporetto SV440, Руководство пользователя

Страница: 28 / 92

12. FRESCOVAPOR
(product not included and sold separately)
only for the Polti Vaporetto
SV440/450_DOUBLE models
Frescovapor is an air freshener that contains
natural substances. Designed to mix with
steam it releases a fresh perfume in every
space and, thanks to its special composition,
it is able to eliminate bad odours.
To use Frescovapor, proceed as follows:
- Unscrew the deodorant dispenser cap
located on the floor brush and fill it with
Frescovapor (18).
- Tighten the cap (18).
- To start dispensing the deodorant, press the
selector located on the brush to the “ON”
position to release the deodorant. Press the
selector back to the “OFF” position to stop it
(19).
Contents of the Frescovapor bottle 200 ml
Frescovapor is on sale at household
appliance stores, at Polti authorised service
centres or on the site www.polti.co.uk.
13. OUT OF WATER
The water level is always visible thanks to the
transparent tank.
When the water inside the tank has been
used up, steam will stop being released.
To restart operations just fill the water tank
again as described in Section 1.
14. REPLACEMENT OF THE
LIMESCALE FILTER
Polti Vaporetto SV440/450/460_DOUBLE
has a filter containing special resins capable
of stopping the limescale and extending the
life of your product.
14.1 Unplug from the mains electricity.
14.2 Remove the water tank from the
appliance, pressing the upper button and
pulling it outward (1).
14.3 Gently lift the hook tab and remove the
old filter (20).
14.4 Position the new filter, push gently and
make sure that it is perfectly inserted (21),
then reposition the water tank.
The limescale filters are on sale at all leading
domestic-appliance retailers, at Authorised
Service Centres and online at www.polti.com.
15. GENERAL MAINTENANCE
Ensure that the appliance is switched off and
disconnected from the mains.
To clean the outside of the appliance, use
only a damp cloth and tap water.
All accessories can be cleaned using running
water, ensuring they are completely dry
before the next use. After using the brushes,
we recommend letting the bristles cool down
in their natural position, in order to avoid any
deformation.
Do not use detergents of any type.
The cloths provided can be washed by
following the instructions included on the
label.
16. STORAGE
16.1 Turn off the appliance and disconnect
from the mains electricity.
16.2 Completely empty the water tank to
avoid leaks.
16.3 Before detaching the cloth from the
brush, wait a few minutes to allow it to cool.
16.4 Wind the power cable around the special
cable-winder hooks (22).
WARNING: Before using Frescovapor on
upholstery, leather, special fabrics and wood
surfaces, consult the manufacturer’s instruc-
tions and always carry out a test on a hidden
area or sample of the material. Allow the stea-
med part to dry to make sure that no changes
in colour or deformations have occurred.
During dispensing of the deodorant, the sur-
faces may feel slightly damper, since Fre-
scovapor mixes with the steam being di-
spensed. To stop dispensing FrescoVapor,
move the selector located on the brush to
the OFF position.
The selector only controls dispensing of the
deodorant that mixes with the steam. It does
not regulate the quantity of steam. To adjust
the quantity of steam, you must use the
steam-adjustment dial (10).
WARNING: This operation must always be
done after having disconnected the applian-
ce from the mains.
We recommend that the filter be changed 3
times per year.
Before using the appliance again, remember
to unwind the power cable completely. The
upper hook rotates 180° in order to wind up
the power cable quickly.
WARNING: Never put Frescovapor into the
water tank.
WARNING: Do not keep the appliance con-
nected to the power supply with the cable
wound up.
E
N
G
L
IS
H
| 28 |