LECOASPIRA PARQUET
45
♦ To connect the two extension tubes together (
B
) and (
B1
) it is important to pay attention to the
direction indicated by the arrows.
♦ Hook both extension tubes (
B
) and (
B1
) to the connecting accessories (
A1
) of the flexible hose (
A
).
PARKING SYSTEM
The appliance is equipped with a parking system on which it is possible, when you have finished
using them, to replace the extension tube accessory (
B1
). Incorrect assembly of the two parts, (
B
)
and (
B1
), will not allow this feature to be used.
The accessories storage (
16
) allows you to fasten the tube (
B1
) with or without the brush assem-
bled onto the appliance body.
To connect the tube (
B1
) to the appliance, slide the hook located on the tube into the accessories
storage on the appliance (Fig. 9).
All the Lecoaspira accessories can be connected directly to the connecting accessories
(A1)
or to
the extension tubes
(B)
or
(B1)
, previously assembled.
To connect the specific accessories for the suction and steam features
(B-B1-C-D-E)
: proceed as
follows:
- Move the locknut
(B2)
of the accessory, if present, to the OPEN position (Fig.A1).
- Attach the desired accessory to the handle.
- Move the locknut
(B2)
of the accessory to the CLOSED position (Fig. A2)
- Check that it is firmly connected.
- There is also a lock button on the steam-suction extension tubes
-
B
and
B1
: proceed as above for the accessories, releasing the tubes by sliding the button as far
as the lock position (fig. A3).
Fig. A3
Fig. A1
Fig. A2
CONNECTING THE ACCESSORIES
STEAM + SUCTION EXTENSION TUBES
CONNECTING THE ACCESSORIES
ENGLISH
LECOASPIRA PARQUET - M0S10067 - 1T10:Layout 1
23/10/2013
9.31
Pagina 45
Содержание VAPORETTO LECOASPIRA
Страница 1: ...PARQUET...
