LECOASPIRA ANIMAL
59
E
E
N
N
G
G
L
L
I
I
S
S
H
H
U
U
S
S
I
I
N
N
G
G
T
T
H
H
E
E
I
I
R
R
O
O
N
N
(
(
O
O
P
P
T
T
I
I
O
O
N
N
A
A
L
L
)
)
Vaporetto Lecoaspira can be quickly transfor-
med into a highly effective ironing system to
make ironing quick and easy. Simply connect
the product to the iron accessory for Vaporetto
Lecoaspira (mod. PFEU0021). You may pur-
chase the iron accessory at any Polti service
centre or from top home appliance retailers.
• Connect the iron to the monobloc plug (
B2
) pro-
ceeding as shown in the “Operation” paragraph.
Check the manufacturer’s label on the garment,
and interpret the symbol on the label as follows:
• For
STEAM
ironing, set the iron temperature to
its maximum travel on the “COTTON - LINEN”
steam position by turning the knob (
Y
).
NB Set at its maximum, do NOT set against
the picture of iron on the knob (Y)
.
Most fabric types, other than delicates can be
STEAM-ironed at this temperature, please con-
sult the garment label. If you want to DRY iron,
set the knob (
Y
) to the required temperature for
the fabric as, shown on the dial.
Nb fabric indications on dial are for DRY iro-
ning, for STEAM ironing set at maximum tra-
vel as explained above.
• Wait for a few minutes until the Iron heating” in-
dicator light (
X1
) goes out, to show that the
soleplate of the iron has reached the required
temperature.
• Press the steam request button (
X
)
on the iron
to release bursts of steam from the holes
on the soleplate. Release the button and
the steam will stop.
When you first start to
use the iron, a few drops of water may come out
of the sole-plate mixed with the steam due to
imperfect heat stabilisation. It is therefore advis-
able to direct the first jet of steam onto a rag.
• In order to obtain a continuous jet of steam
move the sliding switch (
W1
). The steam will
continue to come out even when the steam re-
quest button (
X
) is released. To stop the flow of
steam push the sliding switch backwards (
W1
).
RECOMMENDED TECHNIQUE
for STEAM iro-
ning with Polti iron is APPLY steam (button
X
) on
the upstroke, then release button (
X
) (so no
steam) for the backstroke, so reclosing the fibres,
preventing oversteaming and wetness.
DRY IRONING
• FOR DRY IRONING ONLY (NOT steam iro-
ning), press the main switch (
1
) and adjust the
temperature of the iron by turning dial (
Y
) to the
temperature required for the fabric (as shown
on the dial).
NOTE:
using the iron, it is advisable to adjust the
steam jet at a medium range, or to do some test-
ing in order to find the jet which is more suitable to
the fabric to be ironed.
IMPORTANT NOTE
• Do not leave the iron unattended whilst con-
nected to the mains.
• Iron only on heat resistant surfaces and on sur-
faces that allow the steam to escape e.g. mesh
ironing boards.
• In case of accidental fall of the appliance it is
necessary to have it checked by an authorized
service center as the internal safety features
may have been affected.
•
ATTENTION: if you iron sitting down, do not
place your legs under the ironing board, the
steam can cause burns.
Steam ironing allowed
For dry ironing, set thermostat on •••
Steam ironing allowed
For dry ironing, set thermostat on ••
Check the fabric's resistance to steam
ironing or dry iron with thermostat set on
•
- do not iron
- steam ironing or treatment not allowed
LECOASPIRA ANIMAL - M0S09203 1Q03:Layout 1
20/04/2010
11.38
Pagina 59
Содержание VAPORETTO LECOASPIRA ANIMAL
Страница 1: ...23 B A1 A3 ...
