LECOASPIRA 707
63
E
E
N
N
G
G
L
L
I
I
S
S
H
H
PARQUET BRUSH (PQ)
The parquet brush is designed to clean delicate
surfaces and therefore has bristles and wheels
in material specially selected to avoid dama-
ging such surfaces.
TURBO BRUSH (TB)
The turbo brush uses a turbine system which
operates on suction power only, without electri-
city.
The turbo brush increases the effectiveness
and efficiency of suction on soft furnishings
such as carpets and fitted carpeting since it
combines suction with a mechanical action to
remove dust and dirt (organic and inorganic)
and fibres (hair, etc.). By using the turbo-brush
on carpets you can refresh the fibres thanks to
the action of the roller, which separates them
so that the cleaner can reach right down into
the carpets.
The turbo brush can be used as a traditional
brush on hard surfaces since it has a by-pass
system which diverts the air flow directly to the
suction pipe.
Use: A cursor on the back of the turbo brush
permits you to adapt it to any kind of surface:
slide the cursor (
TB1
) to the left for hard surfa-
ces, and slide it to the right for carpets and fit-
ted carpeting. The cursor adjusts the speed of
the turbine system: when it is moved comple-
tely to the right, the turbine works at the maxi-
mum rotation speed, while when it is moved
completely to the left there is no rotation and
the brush operates as a normal floor brush.
The turbine can be easily accessed for clea-
ning thanks to the practical flap (fig.E).
USING THE IRON
Vaporetto Lecoaspira can be quickly transfor-
med into a highly effective ironing system for
effortless ironing in less time. Simply attach
the Vaporetto Lecoaspira optional iron to the
product (model PFEU0021). The optional iron
may be purchased at Polti Technical Assi-
stance Centres and in the best appliance
shops.
• Connect the iron to the monobloc plug (
B2
)
proceeding as shown in the “Operation”
paragraph.
Check the manufacturer’s label on the gar-
ment, and interpret the symbol on the label as
follows:
• For
STEAM
ironing, set the iron temperature
to its maximum travel on the “COTTON - LI-
NEN” steam position by turning the knob
(
Y
).
NB Set at its maximum, do NOT set
against the picture of iron on the knob
(Y)
.
Most fabric types, other than delicates can
be STEAM-ironed at this temperature,
please consult the garment label. If you want
to DRY iron, set the knob (
Y
) to the required
temperature for the fabric as, shown on the
dial.
Nb fabric indications on dial are for DRY
ironing, for STEAM ironing set at maxi-
mum travel as explained above.
• Wait for a few minutes until the Iron heating”
indicator light (
X1
) goes out, to show that the
soleplate of the iron has reached the re-
quired temperature.
• Press the steam request button (
X
)
on the
iron to release bursts of steam from the
holes on the soleplate. Release the button
and the steam will stop.
When you first start
to use the iron, a few drops of water may
come out of the sole-plate mixed with the
steam due to imperfect heat stabilisation. It is
therefore advisable to direct the first jet of
steam onto a rag.
• In order to obtain a continuous jet of steam
move the sliding switch (
W1
). The steam will
continue to come out even when the steam
request button (
X
) is released. To stop the
flow of steam push the sliding switch back-
wards (
W1
).
Steam ironing allowed
For dry ironing, set thermostat on •••
Steam ironing allowed
For dry ironing, set thermostat on ••
Check the fabric's resistance to steam
ironing or dry iron with thermostat set
on •
- do not iron
- steam ironing or treatment not allowed
LECOASPIRA 707 - M0S09718 - 1R02:Layout 1
28/02/2011
14.02
Pagina 63
Содержание VAPORETTO LECOASPIRA 707
Страница 1: ...A 707...
