E
E
N
N
G
G
L
L
I
I
S
S
H
H
VAPORETTO 2085
28
I
I
M
M
P
P
O
O
R
R
T
T
A
A
N
N
T
T
Before leaving our factory all our products are
rigorously tested. For this reason, your VAPO-
RETTO may contain some residual water in the
boiler.
S
S
E
E
T
T
U
U
P
P
Before using VAPORETTO for the first time assem-
ble the pivoting wheels as indicated in Fig. A.
P
P
R
R
E
E
P
P
A
A
R
R
A
A
T
T
I
I
O
O
N
N
F
F
O
O
R
R
U
U
S
S
E
E
1. Unscrew the patented safety cap (
A
) and fill the
boiler with about 1.3 litres of water using the
special funnel (
14
) making sure that it does not
overflow (fig.1). Normal tapwater can be used.
However, as water by its nature contains lime-
stone, which may cause a build-up of limescale
in the boiler, in hard water areas we recommend
the use of our naturalbase decalcifier KALSTOP
FP 2003.
2. Carefully screw on the safety cap to hand tight
(Fig. 2). Ensure the patented safety cap (
A
) is
fully and correctly screwed on, otherwise you
may experience steam escaping from around
the cap.
3. Connect the power supply cable (
F
) into an
earthed power supply of the correct voltage.
WARNING:
Do NOT under any circumstances put
or leave the filler funnel in the water filling aperture
of the appliance when the appliance is connected
to the mains electricity supply. Danger of burns!
I
I
N
N
S
S
T
T
R
R
U
U
C
C
T
T
I
I
O
O
N
N
S
S
F
F
O
O
R
R
U
U
S
S
E
E
1a. Press the generator on/off switch (
B
) and the
accessories on/off switch (
C
) which will light up.
2a. Open the cover of the central connector block
(
D
) and insert the connector assembly (
4
) pres-
sing the connector button (
5
) taking care that the
locking tab (
6
) is correctly positioned in the lock-
in aperture (
E
) on the block (Fig. 3).
3a.
Wait for the generator on/off switch (B) to go
out. VAPORETTO is now ready for use.
4a. The steam gun (
2
) is equipped with a safety
switch (
2A
) which prevents the accidental start
of the steam jet by children or people who do not
know how to operate the appliance.
With the switch 2A in the “OFF” position, the le-
ver controlling the steam jet is locked. Should
the hose be left unattended for a moment whilst
the appliance is connected to the mains, it is re-
commended to put the safety switch in the
“OFF” position. To start the steam jet, move the
2A switch backwards (ON) and activate the
steam request button (Fig. 4).
The first burst of steam may contain some
water droplets, due to imperfect thermic sta-
bilisation inside the flexible hose. We would
therefore advise that the first jet of steam is
played onto an old cloth until a constant
pressure of steam is obtained.
Note:
The generator on/off switch (
B
) may go on
and off from time to time during use of VAPO-
RETTO. This indicates the machine is maintai-
ning the correct and constant pressure and is
quite normal. If the flexible hose is too much twi-
sted during use, the NO-VOLT device stops the
steam flow. To resume the steam release, press
the steam request button.
C
C
O
O
N
N
N
N
E
E
C
C
T
T
I
I
O
O
N
N
O
O
F
F
T
T
H
H
E
E
A
A
C
C
C
C
E
E
S
S
S
S
O
O
R
R
I
I
E
E
S
S
All the accessories of VAPORETTO can be connec-
ted to the handle or to the extension tubes as fol-
lows (fig. 5):
1b. Move the accessories locking button (
11
) on
every accessory to the “OPEN” position.
2b. Attach the required tool to the hand gun or to the
extention tube.
3b.Move the accessories locking button (
11
) back
to the “CLOSED” position.
4b. Check that the connector button has engaged
and the accessory is fully connected.
P
P
A
A
T
T
E
E
N
N
T
T
E
E
D
D
S
S
A
A
F
F
E
E
T
T
Y
Y
C
C
A
A
P
P
/
/
’
’
’
’
W
W
A
A
T
T
E
E
R
R
O
O
U
U
T
T
’
’
’
’
The appliance is equipped with a safety cap, which
prevents opening of the boiler as long as there is
any pressure remaining inside. This is an important
and indispensable safety device, and it is neces-
sary to follow certain procedures when re-filling the
boiler. Whenever you have used up all the water in
the boiler, proceed as follows:
1c.Switch off the machine at the generator
on/off switch (
B
)
2c.Press the steam request button (
3
) on the steam
gun (
2
) or, if using the iron, the steam request
button (
R
) on the iron (
Q
) so as to fully exhaust
the steam supply from the boiler.
3c.Switch OFF the accessory on/off switch (
C
).
4c.Disconnect the power supply cable (
F
) from the
mains.
5c.Unscrew anti-clockwise the patented safety cap (
A
)
6c.Wait for a few minutes to allow the boiler to cool
down.
7c.When cool, proceed to carefully refill the boiler
as described in paragraph 1 of the section “Pre-
paration for Use”. If refilling the boiler when not
completely cooled, we recommend that you ca-
refully pour only very small quantities of water at
VT 2085 M0S07125 - 1O03 A5:FEV 1000-950.qxd 12/03/2008 16.33 Pagina 28
Содержание VAPORETTO 2085
Страница 1: ......
