E
E
N
N
G
G
L
L
I
I
S
S
H
H
VAPORELLA PROFESSIONAL SYSTEM
30
STEAM IRONING
1b. Set the iron temperature to the “COTTON
- LINEN” steam position (fig. 5), by tur-
ning the knob (
G
). All types of fabric can
be ironed at this temperature. When dry
ironing, set the knob (
G
) to the required
temperature for the fabric, shown on the
rotating indicator.
2b. Wait for the pressure indicator light (
K
) to
go out (about 15 minutes). Push button
(
H
) on the iron to release bursts of steam
from the holes on the soleplate. Release
the button and the steam will stop (fig. 6).
NOTE:
during initial operation of the iron,
a few drops of water mixed with steam
may come out of the soleplate until the
temperature stabilises. It is advisable to
direct the first jets of steam onto an old
cloth until a uniform stable jet of steam is
obtained.
3b. In order to have a continuous steam jet,
move the button (
J
) forwards. Steam will
keep on coming out, even releasing the
button. To interrupt the outlet, move the
button (
J
) backwards (fig. 7).
4b. By turning the steam flow control knob (
L
)
you can vary the amount of steam accor-
ding to the type of textile to be ironed
(more or less delicate). You can use this
control to increase the steam flow by tur-
ning in anti-clockwise direction. Turning
the control in anti-clockwise direction re-
duces the steam flow (fig. 8).
NOTE:
• The pressure indicator light (
K
) may go on
and off from time to time during use of Va-
porella. This indicates the machine main-
taining the correct and constant pressure
and is quite normal.
• If no steam is released from the iron, check
the following: the switch (
K
) is lit up; there
is water in the boiler; the steam control
switch (
L
) is set to one of the “Steam” set-
tings.
H
H
O
O
W
W
T
T
O
O
C
C
L
L
O
O
S
S
E
E
T
T
H
H
E
E
M
M
A
A
C
C
H
H
I
I
N
N
E
E
1d. Turn off switches (
B-C-P
).
2d. Disconnect the supply plug. Rewind the
supply cable (
D
) to its storage (
Q
).
3d. Pull the opening handle (
O
) and support
the board (
N
) as it descends to the floor.
4d. If you want to fold up the iron board with
Vaporella attached, it is advisable to place
the iron on the iron stand (
U
) in the fol-
lowing way:
• take out the iron stand (
U
) pulling it from
the back of Vaporella.
• Place the iron on the iron stand (
U
) and fix
it with the fixing belt (
V
) hooking it to the pin
on the Vaporella (fig. 9).
• Winder the main cable (
D
) in its housing
(
Q
).
5d. The ironing board can now be stored.
NOTE:
the iron board an the Vaporella can
be folded up separately.
VL PROFESSIONAL SYSTEM M0S05865 1O09:FEV 1000-950.qxd
29/06/2009
10.58
Pagina 30
