POLTI VAPORELLA NEXT VN18.10, Инструкция по эксплуатации

Страница: 24 / 80

Check, based on the following table, the most
appropriate type of ironing:
3. STEAM IRONING
3.1 Make sure that section 1 has been
completed and regulate the temperature of
the iron (6) as described in section 2
3.2 Wait until the “steam ready” indicator ( )
of Polti Vaporella Next (5) is on and constant
and the iron heating indicator light (4) is off.
3.3. Press the steam button on the iron (7) to
make the steam come out from the holes in the
soleplate. Start ironing the garments. Releasing
the button, the flow stops.
4. STEAM PULSE FUNCTION
(only for models POLTI VAPORELLA
NEXT VN 18.35 - VN 18.30)
The STEAM PULSE function (intermittent
steam) can be activated for quick and easy
ironing, by double-clicking on the steam but-
ton of the iron (7). The intermittent steam pe-
netrates further into the fabric, speeding up
and improving the ironing. In this mode, the
iron will alternate between emitting steam
and not emitting steam.
To deactivate this function, press the steam
button of the iron again.
To reactivate, repeat the procedure from the
beginning.
The Steam Pulse function is also recommen-
ded for vertical ironing.
5. VERTICAL IRONING
It is possible to use the iron vertically to
remove creases from fabrics and/or to
freshen up the fibres, eliminating possible
residual odours.
Hold the iron in a vertical position, press the
steam button (7), and if permissible based on
the type of fabric, touch the fabric lightly with
the plate.
6. DRY IRONING
Make sure that section 1 has been followed,
adjusting the temperature of the iron (6) to
the lowest temperature as in section 2. Conti-
nue with the ironing without pressing the
steam button on the iron.
7. ECO FUNCTION
(only for models POLTI VAPORELLA
NEXT VN 18.35 - VN 18.30)
With the ECO function, Polti Vaporella Next
automatically sets the steam pressure for si-
gnificant energy savings and at the same time
ensures excellent performance for ironing all
fabrics, including the most resistant ones
(cotton / jeans / linen).
To activate or deactivate the ECO function, ju-
st press the ECO button on the appliance (8).
8. TURBO FUNCTION
Using the TURBO function, you can quickly
and easily iron even the heaviest fabrics,
smoothing out the most stubborn creases in
one go.
High temperature – cotton, linen:
Set the iron temperature adjustment knob
to the position •••
Medium temperature – wool, silk:
Set the iron temperature adjustment knob
to the position ••
Low temperature – synthetic, acrylic, ny-
lon, polyester:
Set the iron temperature adjustment knob
to the position •
- Do not iron
- Steam ironing and steam treatment not
allowed
WARNING: For low temperature we do not
recommend the use of steam since water
could come out from the holes on the
soleplate. For medium temperature alternate
the use of steam and dry ironing to avoid
water leaking from the holes on the soleplate.
Divide the laundry according to the symbols
on the garment labels or according to the
kind of fabric. Always start ironing with the
garments that require the lowest temperature,
in order to reduce the waiting times and avoid
the risk of burning the fabrics.
When first using the steam, there may be
some drops of water leaking out of the plate,
this is due to imperfect thermal stabilization.
We therefore recommend that the first jet of
steam be directed onto a cloth.
The heating indicator light turns on and off du-
ring use. This indicates that the electrical resi-
stor has started to work to keep the temperatu-
re in the iron steady: continue ironing normally.
WARNING: Do not place the hot iron directly
on any surface. Polti Vaporella is equipped
with an iron rest mat with soft non-slip
inserts designed to resist high temperatures.
During dry ironing, take care not to push the
steam release button on the iron since some
water drops can come out from the soleplate.
E
N
G
L
IS
H
| 24 |