30
Problem
Solution
The input level on
the camera, recorder,
or mixer is too high.
•
Turn down the audio input level on your camera or recording device.
•
Decrease the receiver’s output level.
•
Make sure the output of the receiver is plugged into the line-level input on your mixer, or that the line/mic
switch on your mixer is set to line.
•
Turn down the gain on your mixer.
•
Adjust the output volume on the transmitter, but keep this level as high as possible without distortion.
There is no audio.
•
Make sure the transmitter’s mute button is not active.
•
Check all cables to make sure they are completely plugged into the proper inputs.
•
If you are transmitting a line-level signal, make sure there is audio coming out of the line-source device.
•
If you want to record via the microphone input, make sure there is nothing plugged into the transmitter’s
line-level input.
•
If there is no sound in the headphones, make sure the headphones are completely plugged into the
headphone jack. Increase the receiver’s output level.
•
Make sure the transmitter and receiver are set to the same channel.
•
Make sure the receiver is receiving signal from the transmitters, and the transmitter indicators are not
blinking.
