Windows Vista and Windows 7 users:
After the INF file is installed, your computer
should automatically install the necessary drivers when you connect a Pololu USB AVR
programmer, in which case no further action from you is required.
Windows XP users:
After the INF file is installed, follow steps 5-9 for each new Pololu USB
AVR programmer you connect to your computer.
5. Connect the USB AVR programmer to your computer’s USB port.
The programmer
is actually three devices in one so your XP computer will detect all three of those
new devices and display the “Found New Hardware Wizard” three times.
Each
time the “Found New Hardware Wizard” pops up, follow steps 6-9.
6. When the “Found New Hardware Wizard” is displayed, select “No, not this time” and
click “Next”.
7. On the second screen of the “Found New Hardware Wizard”, select “Install the
software automatically” and click “Next”.
Pololu USB AVR Programmer User's Guide
© 2001–2010 Pololu Corporation
3. Getting Started in Windows
Page 8 of 36