Creating a new AVR Studio project, step 1
2.
Select
AVR Simulator
as the debug platform and then select the appropriate device
for your target AVR. For an Orangutan or 3pi Robot, this will either be
ATmega48
,
ATmega168
, or
ATmega328P
depending on which chip your Orangutan or 3pi Robot
has. Click
Finish
.
Creating a new AVR Studio project, step 2
3.
Write your program in BlinkLED.c as seen in the screen shot below and click the
Build
button on the toolbar (or press
F7
).
Pololu USB AVR Programmer User's Guide
© 2001–2010 Pololu Corporation
3. Getting Started in Windows
Page 12 of 36
